Shandong Lukes Machinery CO.,LTD

■ Suitable for cardboard ( standard height of die cutter setting at 23.8mm )
weight ( gram) thickness height of creasing line (mm)
23.50 23.40 23.20 23.20 23.10 23.00
200 0.28mm 0.3x1.0 0.4x1.0
250 0.35mm 0.3x1.2 0.4x1.2 0.5x1.2
300 0.42mm 0.3x1.3 0.4x1.3 0.5x1.4
350 0.50mm 0.4x1.4 0.5x1.5 0.6x1.5
400 0.56mm 0.5x1.6 0.6x1.6
450 0.63mm 0.5x1.7 0.6x1.7 0.7x1.7
500 0.7mm 0.7x1.7 0.8x1.7
Noted: above specification can only be used as recommendations , among which can the gray part are most preferred
■ Suit for corrugated board (standard height of die cutter setting at 23.8mm)
Corrugated board thickness of corrugated height of creasing line creasing line type creasing line type
After pressing flat (1.05mm thickness) (1.42mm thickness)
E- pit 0.65mm 23.10mm 0.7x2.3 -----
E-pit 0.75mm 23.00mm 0.8x2.5 -----
B-pit 0.85mm 22.90mm 0.8x2.7 0.8x3.2mm
B-pit 0.95mm 22.80mm 1.0x3.0 1.0x3.5mm
C-pit 1.05mm 22.70mm 1.0x3.2 1.0x3.5mm
C-pit 1.15mm 22.60mm ----- 1.0x4.0mm
■ Specifications of Creasing Matrix
Narrow type Small type (standard) Big type (standard)
0.3x1.0 0.3x1.2 0.3x0.8 0.3x1.0 0.3x1.1 0.6x3.0 0.6x3.2
0.3x1.5 0.4x1.2 0.3x1.2 0.3x1.3 0.3x1.4 0.7x3.2 0.8x3.0
0.4x1.3 0.4x1.4 0.3x1.5 0.4x0.8 0.4x1.0 0.8x3.2 0.8x3.5
0.4x1.5 0.5x1.0 0.4x1.2 0.4x1.3 0.4x1.4 0.8x4.0 0.8x5.0
0.5x1.2 0.5x1.3 0.4x1.5 0.4x1.7 0.5x0.8 0.8x6.0 1.0x3.0
0.5x1.4 0.5x1.5 0.5x1.0 0.5x1.2 0.5x1.3 1.0x3.5 1.0x4.0
0.5x1.6 0.5x1.7 0.5x1.4 0.5x1.5 0.5x1.6 1.0x4.5 1.0x5.0
0.5x1.7 0.5x1.9 0.6x1.5 1.0x6.0 1.2x4.0
0.6x1.6 0.6x1.7 0.6x1.9 1.2x4.5 1.2x5.0
0.6x2.1 0.6x2.3 0.6x2.5 1.2x6.0 1.4x4.0
0.6x2.7 0.7x1.7 0.7x1.9 1.4x5.0 1.4x6.0
0.7x2.1 0.7x2.3 0.7x2.5 1.6x5.0
0.7x2.7 0.8x1.7 0.8x1.9
0.8x2.3 0.8x2.5 0.8x2.7