Qingdao SICO Electronics Co., Ltd.

Power Distribution Box Installation
1) Distribution boxes are made of non-combustible materials.
2) Production sites and offices with low risk of electric shock can be equipped with open distribution panels.
3) Closed cabinets should be installed in processing workshops, casting, forging, heat treatment, boiler rooms, carpentry rooms, etc. where the risk of electric shock is high or the operating environment is poor.
4) In dangerous places of operation where conductive dust or flammable and explosive gases are produced, electrical installations of closed or explosion-proof type must be installed.
5) Distribution box electrical components, instruments, switches and lines should be arranged neatly, installed firmly, easy to operate; Cabinet(box) shall be free of accumulated dust, water and debris.
6) The bottom of the cabinet(box) installed on the ground should be 50 to 100 mm on the ground of Gaochu; The height of the operating handle center is generally 1.2 to 1.5 M; There are no obstacles within 0.8 to 1.2 m in front of the cabinet(box).
7) The protection line is reliable.
8) No naked live body shall be exposed outside the cabinet(box); Electrical components must be installed on the outer surface of the cabinet(box) or on the power distribution board and must have reliable screen protection.